The manufacturing process of glass begins with the mixing of the specified ingredients. Once the ingredients are ready the float manufacturing process can begin. It consists of different furnaces, in which the molten glass travels until it is cooled near the final steps were it emerges as solid flat glass. At this point the glass is referred to as annealed glass. Having completed this first process the glass is still not ready to be installed on automobiles. This is because it is too fragile and breaks under low pressure. Also if fractured it breaks into sharp edges with could be fatal in a car crash. Therefore the final step of the process involves improving its strength and making it safer when fractured.

Cooled in the open air, the ribbon of glass is inspected, and then cut into plates (usually 6 x 3.21 meters) that are automatically trimmed (edges removed) and formed.

Some common words found in the essay are:
Sag Bending, , Cutting Cooled, Considering Laminated, Furnace It's, Manufacturing Process, Annealing Placed, Egypt Surprisingly, Annealed Flat, Glass Glass, manufacturing process, flat glass, glass process, laminated glass, float glass, raw materials, process glass, tempered glass, windshield manufacturing, glass glass, process glass ready, float glass process,
Approximate Word count = 1329
Approximate Pages = 5 (250 words per page double spaced)