Procedure Essay Building your own PC

A detailed Summary of Procedure Essay Building your own PC

In the following paragraphs I will be instructing you step by step on how to build your own PC (Personal Computer). It is recommended that you have general knowledge on computers. This means that you need to know what the different parts are and what they do.

The first thing that you want to do is to get all your tools and parts together. The tools that you will need are a Phillips screw driver and a Ľ" socket wrench. The basic parts that you must have are a motherboard (PC Board), a video card, a sound card, some RAM (Random Access Memory), a hard drive, a 3 1/2" floppy A drive, and a computer case. For these particular instructions you will need a "tower" case. You may also want to include a CD-ROM into your system. Must current day computers have them installed, but it is not necessary.

Now that you have all your parts and tools it's time to get started. Now the first thing that you will want to do is take the outer shell of the computer case off and set it to one side. After you have taken the outer casing off you will notice that one side of the inner case has screws holding in a panel. This is the side panel. You will want to unscrew t

he screws that are holding the side panel in place and then place it on the table with the inside facing up.

You will know want to take your RAM and place them in the slots they were designed for on the PC board. You will then want to take the IDE cable that came with the case and plug it into the PC board where the IDE 1 is labeled. You will then take the other end of the cable and plug it into your CD-ROM. Continue to plug the middle of the cable into your hard drive making sure the red stripe is towards the power source. Now you need to take the floppy cable and plug it into the PC board where the Floppy 1 is labeled. Then take the other end of the cable and plug it into your floppy drive. Remember to make sure the red strip is towards the power source.

The next thing you are going to want to do is take the mounting screws that came with the case, and screw them into the screw holes on the side panel. You will want to use the Ľ" socket wrench to do this. After you have tightly crewed those in you will want to take the PC board and set it on top of the mounting screws. You will want to place the holes of the PC board over the mounting screws. You will then want

Some common words found in the essay are:
Access Memory, CD-ROM Continue, Personal Computer, pc board, Own PC, PC Board, floppy drive, cable plug, hard drive, power source, drive cd-rom, screws holding, mounting screws, 1 labeled cable, Ľ socket wrench, drive floppy drive, Ľ socket, plug pc, cable plug pc, pc board ide,

Approximate Word count = 795
Approximate Pages = 3 (250 words per page double spaced)

Category: Miscellaneous

join now Save Paper

Saved Paper

Save your papers so you can locate them quickly!

Newest Essays

Testimonials

"Thank You So Much!!! You have saved me once again!!!"
Jack M.
"With so many papers to chose from, I was able to get ideas to help me with all of my classes. Thank You!"
Brian P.
"I've used this site for the last 3 years to help me come up with ideas for my papers."
Sara J.
"I use this site every week to help me write my own papers!"
Rachel W.
"I love this site!!!"
Marie N.