Now it is time to dig. Dig on the inside of the painted shape. Choose one side to make a plant stand. The plant stand should be at least one foot down and ten inches out from the painted line. You should dig the rest of the hole at least two feet down. When you

are finished digging, you want to take damp sand and pack it on the walls and the bottom. You should stop when the whole pond is entirely covered with sand. You then want to put about two to three layers of plastic on it.

Now it is time to put the liner in the hole. Have a friend help you put the liner in the hole. Once the liner is in the hole, you want to step in it with your bare feet, and push the liner to the walls. Start filling the pond with water while you are in it. Try to work out the wrinkles (do not worry if you do not get them all out, it will make it harder for the fish to eat the algae). Keep working out the wrinkles until the pond is filled. Take about four big rocks and put one on each of the corners. That is only temporary until you get the slate to put around the pond. The slate should go around the entire pond in two lay

Some common words found in the essay are:
, liner hole, aquatic plants, liner size, size pond, plant stand,
Approximate Word count = 571
Approximate Pages = 2 (250 words per page double spaced)