A photo is a piece of art used to capture a moment in time. For a photographer to beautify the appearance of the photos he takes, he must know how his camera works. The photographer must adjust his aperture to suit the type of film he has and know how to load the film.

Stillness is a key factor in taking a quality photo. If the camera is shaken during the time that the shutter is opening and closing, it will cause the photo to appear blurry. A tripod, a three-legged stand that screws into your camera, is often used to prevent the shaking of a camera. It is. Leaning against a pole or tree will lesson a photographer's shaking if he has unsteady hands or a large lens that weights down the front of the camera.

The photographer's flash setting will depend upon the lighting and the distance away the target is. A flash set on a higher power will cause a brighter appearance to the target, where as a lower setting will give a softer more natural look. To know if the photographer needs to use the flash, a light will appear when you he holds down the button to take the photo slightly. Some cameras have meters that tell the photographer if he needs to use a flash depending upon the speed of the film.

A photographer's film can make all the difference in a quality photo. The lower the asa on the film, like 200, the slower the shutter is opened. This will make your photo clearer. It will lack the grainy look that a higher asa such as 1600 will produce. A higher asa will take photos much faster which will enable a shot to be taken in a darker setting or an actio

Some common words found in the essay are:
, outer circle, photographer flash, distortion lines, inner outer, quality photo, photographer adjust, picture focus,
Approximate Word count = 577
Approximate Pages = 2 (250 words per page double spaced)