First, start by unscrewing all the screws on your case that hold the base of your case to your cover. The case may be a little stuck but ease it out with a screwdriver or thumbs. If power supply came with your box, you can skip this step otherwise you will need to install it. Depending on the size of box you purchased you may want to leave the power supply out of your box until you have finished install

After the motherboard is in, the rest is easy. Install memory in to the slots shown on the motherboards instructions. Follow this step by install video card. The different cards that you can connect to a computer are stubborn to get in and get out. You must use pressure, but not too much, because you can crack the card or break the motherboard.

The hard-drive installation is completed by first verifying its settings to slave, master, or single, which are on the instructions for the hard-drive. Lastly, secure the hard-drive to the box and connect the cables. Use the same for installing the floppy drive and the CD-ROM.

The next step is to install your processor according to the directions of both your motherboard and processor. In the directions for yo

Some common words found in the essay are:
CPU Fan, , Linux Windows, Set BIOS, building computer, power supply, power supply box, step install, supply box, directions motherboard, power source,
Approximate Word count = 513
Approximate Pages = 2 (250 words per page double spaced)